PDA

View Full Version : Rocker Molding ID

Brian Thompson
02-26-2008, 09:36 PM
Can someone ID these rocker panel moldings???
models916
02-27-2008, 08:32 AM
61-64 bisquick. 65 and later had a hole in the front for mounting. Might have come in diffferent lengths for different models. Measure the length and I will compare them to mine.
Brian Thompson
02-27-2008, 10:40 AM
They are 82 1/2" long.
models916
02-27-2008, 11:20 AM
When I get home I will measure the ones I have.
MileHiSS
02-27-2008, 04:05 PM
Models,

The pair I took off my 62 had holes in the front, and look to be original. The repops had no holes. Is there a chance?
Brian Thompson
02-27-2008, 04:24 PM
I guess they are 62 Biscayne repop moldings.... Would these have come on the BelAir as well, or did they use the impala style rocker moldings?
models916
02-28-2008, 11:11 AM
I forgot to measure mine last night. I believe the 65 and later used the screw in front style. Belair from what I have seen used the same as the Impala. I like the narrow trim so I have a set for my Delray fantom.
tripower
02-28-2008, 11:57 AM
I guess they are 62 Biscayne repop moldings.... Would these have come on the BelAir as well, or did they use the impala style rocker moldings?

Brian, All of the 62' Bel-Air Bubble tops that I recal do not have rocker moldings. Since yours is a Impala, you are using the Impala trunk lid and, 61' vent trim I would tend to stay with the Impala trim. Good Luck
Brian Thompson
02-28-2008, 12:04 PM
Brian, All of the 62' Bel-Air Bubble tops that I recal do not have rocker moldings. Since yours is a Impala, you are using the Impala trunk lid and, 61' vent trim I would tend to stay with the Impala trim. Good Luck

I will be using the Impala rocker moldings. I just wanted to see what these are for so I can list them on Ebay.

Anyone need these???? They are new and still in the package they came in.