New guy here

[Rodder29]

Hey guys, I just joined this forum and so far the wealth of knowledge has been great. I have a '29 Model A that had a flathead in it, however I have always been a Chevy guy and when an opputunity to purchase a W engine came up I pounced on it. I have aquired a '58 348 car engine, the heads are done the block has had a clean up bore done, which I still need to hone to piston fit. I would like to find a 3x2 intake set up, and seeing that the car is so light I plan on over camming it for that killer sound. I look forward to sharing ideas and receiving advise from those that know. Cheers, Pete.

[Ronnie Russell]

Welcome Pete, Nice project. Plenty of information on this site. The search feature allows researching practically any subject about your 348. Or just ask. :):)

[WENGINE]

Welcome aboard Pete sounds like a great project you've got going there:beerbang. Look forward to hearing your Ideas and progress as well.

[Tom Kochtanek]

Pete, welcome to the Forum. Lots of resourceful help here. I posted a response to your message in the other discussion thread about your heads, the block, and the 409 crank :).

Good luck with your new project!

TomK