how much hp can u pull out of a 348

[Muted]

with a few mods and a blower how much hp wood u get out of a 348

ie biger cam blower pistons all msd

[SSpev]

How much money you got...;) :p

Mo Muny Mo HP:D

[fatride]

I'll take a stab at that, I'll guess around 450 hp.
:eek:

[blown348]

Mine 348 made 520hp at dyno

[Muted]

Originally posted by blown348
Mine 348 made 520hp at dyno

can u post the setup u used?

[1958 impala]

Blown 348,
You just made myself and im sure some others jealous,good for you.Are you street legal? Did you have to build your own pulleys?
not many blown 348s around.:cheers

[rwagon57]

Blower Drive Service, aka BDS makes a 6-71 blower set up for 348s and low perfomance 409s

[blown348]

There isn´t much special in my motor. Shortblock is basically standard w/ arp main studs and rod bolts. I made pockets in original pistons to clear valvels. Cam is crane mech. roller about
at .050 236/242´ lift.614, roller rockers, 2,07/1,72 valvels, ported heads(small port), comp. is 8,3:1, self made headers(2"prim) 3"exhaust. I made my own intake blower is V6-71 gmc 9%overdrive (about 15psi), 4*dellorto 48mm downdraft carbs.
aluminium flywheel, fluid dambner, hv oilpump, crane HI-6 ign.

Max rpm I use is 6800, shiftlite is at 6500.
and yes, car is street legal and only problem is traction(1/4mile 13,8/110mph w/ cooper radials)

That´s about it.
ps. sorry about my english

[CDNpontiac409guy]

Blown... "sorry about your English" ??!!!
I read THAT just fine :deal :cheers :cheers

BEAUTIFUL work, man :cheers
I can just tell from the combination.... you thought this out.

The SPINNING!!!!!
It must be HILARIOUS !!!!