409 Stuff

[58delray]

Hi gang, i'n new to the board. Question? Anyone ever seen an Edelbrock intake or water pump on a 409? I was told by Edelbrock Technical Department that they had NO Parts for a 409. Seems like I've seen a polished intake on a 409 car before and My 409 has a Holley Fuel pump which is just about the same as Edelbrock.
Thanks

[dq409]

Hi,Tommy,Welcome!! Check your mail,,,,,
That polished manifold on my engine is a stock 425 horse manifold. The only aftermarket ones are from Offy, low horse I believe and a Z-11 type that you will find a contact on my website.
You will find all the info you need right here !!,,,,,dq

[dq409]

Tommy,,, Your fuel pump (mechanical) should be the same as a small block Chevy,,,dq

[58delray]

Thanks dq. I spoke with a local this afternoon who knows of someone who can polish the existing. We will see.

http://community.webshots.com/user/58delray

Thanks

[Bungy]

Edelbrock DID make a 6x2 intake for the W motor some time ago. I have also seen aluminum water cooled exhaust manifolds for marine 09s with an Edelbrock script on them.