fenderwell headers

[ZEBEBAD]

Does anyone make these for the X frame cars in the sb, bb, and 348-409 ?
Very hard item's to find.

[Tic's60]

Mine that I have in my 60 with a BBC are from a 62-63 Nova. The passenger side fit easily but I had to modify the back to tubes on the drivers side to go up higher to clear the steering. They go up and over the frame and tuck down pretty good for 2" tubes and 3 1/2" outlet. AND BOY DOES SHE MAKE SOME LOVELY NOISE :beerbang
I did wrap the two tubes with heat wrap since they come pretty close to the master cyclinder.
I was trying to find a set of 409 under the frame headers for awhile and just cut the flange off and redo it with a BBC flange but no luck finding a set within budget.
I was looking at clipster and block hugger types as well but I have never seen a 60 with fenderwell headers soooooo :brow

http://tictoc.us/bad003.bmp

Thanks

Mike

[Tic's60]

http://cgi.ebay.com/ebaymotors/58-64-CHEVY-HEADERS-FENDERWELL-EXIT-NEW_W0QQcmdZViewItemQQcategoryZ33631QQitemZ8001790 206QQrdZ1QQsspagenameZWDVW

SBC 58-64 Fenderwell headers

[No409]

those arent fenderwell headers, they exit out the side under frame. thats what i had when the SBC was in my 63

[JimKwiatkowski]

ZEBEBAD,Welcome to the site,good to see another member from Grand Rapids :) BTW my wife was born March 5,1956 :D

[ZEBEBAD]

Thank-you ! For The Welcome,
Tic's60 Can You Show A Picture Of The Drivers Side That You Had To Modify ?

[ZEBEBAD]

Jim What Ford Dealership Do You Work At ?
I Also Have A Camaro 69 RS Cloned W/ Z28 Emblems Pro-street & Also Drag race It.

[JimKwiatkowski]

ZEBEBAD,I work at the former Duthler Ford,now it's Fox Ford.Me and my brother own a 67 Camaro for drag race only,we haven't raced it for 5 years and we are trying to sell it now.What part of town do you live?I live on Dayton st 2 blocks from John Ball Park.

[ZEBEBAD]

Jim, I Really Don't Live In Grand Rapids I Just Used Gr As It Is A Well Known Town In Mich . Though I Do Work At The Gm 36th Street Plant, I Actually Live 35 Miles North Of Gr In Newaygo 3 Miles From Croton Dam.

[JimKwiatkowski]

Do you know Ron Clawson or Dave Orlow?

[ZEBEBAD]

No Iv'e Only Been There Since Nov. 8th 2004, I'm A Gm Transfer From The Old Alpine Ave. Lear Plant.

[Tic's60]

As soon as I unpack and make my way out there if it stops raining. Been in Chicago for a week and just got back.
The back two tubes a VERY radicaly cut and almost go straight upfor 3-4" then bend over the steering bar and down.

[ZEBEBAD]

That Would Be Great , Thank's Tic