EB9 sender conversion

[models916]

Check out the lack of parts in the conversion to electronic sender for my Sun 8.5 tach/EB9. Just a little board with some unknown junk attached. You can tell I'm well versed in electronics. One wire to 12v ignition source, one wire from (-) coil, two wires as usual to back of tach. $150.00.

[models916]

not much there

[4onthefloor]

Looks like technology changed a teeny tiny bit since then !!!

[RCE1962]

Models916

Did you have the conversion done or was this a "kit" of some sort?

RCE1962

[models916]

Very nice guy to talk to. Been doing this a long time. Highly recommended. He also replaces the meter movement in my tach and just waited for me to get up the cash, wasn't in a hurry to take my money.

http://www.tachman.com/gm.htm

[4onthefloor]

Tachman is simply the best...he really does excellent work and cost is reasonable.

[RCE1962]

Thanks guys. I have a one these units that will need that work done. :clap

RCE1962