PDA

View Full Version : rocker noise...

29Coupe348
06-26-2006, 07:10 PM
i have a question, is it normal to have some slight rocker noise (hydrolic lifters) when the motor is hot (200*)???...its ultra quiet when is cold....thanks,mike
fatride
06-26-2006, 07:45 PM
i have a question, is it normal to have some slight rocker noise (hydrolic lifters) when the motor is hot (200*)???...its ultra quiet when is cold....thanks,mike


Yes!!!!!!!!!!!!!!!
Chip
06-26-2006, 09:10 PM
My Crane rockers make noise when hot. I am 3/4 turn down runs fine and hasn't blown up yet. I run it hard.:beerbang
models916
06-26-2006, 11:15 PM
On Hyd. lifters, when the oil is hot (thin) it bleeds a little faster than when cold and the noise is the valve clicking against the seat in the head. Pretty normal with higher spring pressures and hi-tech lifters.
dq409
06-27-2006, 03:02 AM
On Hyd. lifters, when the oil is hot (thin) it bleeds a little faster than when cold and the noise is the valve clicking against the seat in the head. Pretty normal with higher spring pressures and hi-tech lifters.

Several others should read this and RELAX,,,:D
29Coupe348
06-27-2006, 06:18 PM
lol...i can relax now...thanks guys, mike