348 Oil Pump Torque

[ejw 71]

My Motor's manual doesn't have the torque setting for the bolt that attaches oil pump to rear main cap. Anyone have that figure for a 348? Thanks, Ed

[BlueSwede]

This is easy!

Almost any answer can be found on these pages :)

Oil Pump to Rear Bearing Cap Bolt 7/16"-14 50 ft. lbs.

You have all needed torque figures under referens 348-409 (start page at the top, third choise from the left.
direct link: http://www.348-409.com/torque.html

:cheers