348 Oil Pan

Don Jacks

Well Seasoned Member
Supporting Member 3
That is a repair section,not the complete pan.They also have complete pans available.Call and talk to them,they'll fix up right up.
 

RussC

Well Known Member
My pan was a used OEM 348 I had a clearance issue between the pan and a main spar. I couldn't clear the deeper 409 pan. You probably don't have that problem
 

Gold348

Active Member
Called Show Cars and found their 348 pan is actually built to 409 OEM spec, but has the dipstick on the 348 side. As a result, the pan is larger and too deep for my boating application.

It appears my only options are to refurb the existing one by hammering out the dent, or go out and find a used 348 oil pan. I'm going with refurbing the existing pan as the dent is not large and the pan seems ok otherwise.

Appreciate all the replies and suggestions on here!
 
Top