Recent content by 567trishop

Yes I have good headers as the engine is in a 55 chev, with gasser style headers, thanks

Grind # 409CH 1419S /4424S R 110.0 DURATION @ .050 INTAKE 247 ROCKER ARM RATIO VALVE ADJ INTAKE .014 DURATION @ .050 EXHAUST 263 INTAKE 1.75 VALVE ADJ EXHAUST .016 LOBE LIFT INTAKE .3480 EXHAUST 1.75 VALVE LIFT INTAKE .609 LOBE LIFT...

Thanks, I had email them last week, but I will ring today

Hi, i brought a comp com a few years ago and have lost the spec sheet, the cam is for my 348, sroked to 434 supercharged the number on the cam are, 1419s / 4424s c48-14 cc r11dr q7042 -09 any help would be great, thanks anthony

I have a blown 348 with a eagle 4" stroke. It has 600hp at the rear wheels and is a manual. My oil pump pick up broke of causing damage to the crank and rods only. Can i put a Callies Dragonslayer Series Forged 4340 Crankshaft for Big Block Chevy 4.000" Stroke, 2.200" Pin, 2.750" Mains in the...

i made my blower manifold at of a edelbrock twin four, can send you pictures if you like

The Cam is a comp cam with 607 value lift at 1.75 intake @50 is .247 exhaust @50 is .263 110 lc. Compression ratio is 7:1 pistons have been teflon coated ring, other wise followed the build on the 434 in hot rod deluxe mag

Hi I have been collecting and have this engine built of 18 months. It start life as a four barrel 348 in a 59 chev sedan, it now as a four inch stroke, the block has been grouted to the bottom of the welch plugs, full solid roller cam, eddy heads, ross pistons, manifold made by engine builder...

looks nice, still building my stroker

I am building the car for a friend. He wants the paint kept as is, which will be painted black at a much later date.

few more pics, ran into trouble with the turbo guide, and replaced it with a power guide. I have put air ride on as well.

Hi I have just discovered that there are a different crank for the turboglide and the manual trans? Can you turn down the spiget (height) on the converter so it will fit inside the crank? thanks anthony

I'm currently building a 434, supercharged, I hope to have mine dyno by August too.

Thought I'd show you some pics of a 59 that I'm building, I,ve powercoated the chassis and parts, and have just started to weld up some rust, (floor pans and trunk floor)