I have the box somewhere--If some one wants the number, I will look for it--What I ran for years drag racing is a joint for a ford truck-- 1 ton it looks bigger but it will fit--A old timer running a driveshaft shop years ago told me that and that is what I ran for years until I went to a...
jim SS409--your right Kansas City track is closed and prop sold--A nother one worth looking at is St. Louis--I have raced there alot--Very large area all black top right off of I-55--They have the roundy-roundy track there also--that is where the car show and swap meet are usually at--Ask Tom K...
I have a 9,000 lbs 2 post hoist brand name Forward out of Texas--and arms are ok as long as you know where to put car-- Front pads go on frame at the closet point toward rocker panel--the rear I put on the frame right next to the brackets that the bottom arms are bolted to. I also have a 7,000...
Do not forget if the starter is the straight across pattern you have to have the inside hole tap out. All them starters are OK, but if you are running 15-1 compression like I am, good luck. I run the MSD one it works but pricey. See you at the track.
Jeff Hall is right. All it takes is the old first style. Round canister type turn it up side down with the 3 off sets facing up, it is the one that use the large allen wrench to tighten it up. My machine shop man told me that one. Good Luck. See you at the track.
Hi every one. I have two all out Drag cars-59 impala-59 elcamine both have Stahl looks just like BSL409 they both fit with out any mods 1 set 1-7/8 and the other 2". They are a little pricsy but for racing I psrsonally think they are worth it. See you at the track.