Recent content by 88m5

Eastern Regionals 348-409 and some X-frame Friends Rocking Chair Mason Dixon Dragway Boonsboro Md. We will be running a bracket style race and welcoming stock cars also. The only electronics allowed are trans brakes, two steps and line locks. No grids, delay boxes or automatic shift devices. As...

I am definitely not having a great day. The event is the the 22nd with the 23rd as the rain date.

Dang typo is supposed to be the 21st

I wanted to update this event first it will June 24th not the 29th. Also it will be only 1/8th mile so i need to know if this will have a big impact on this event. So i welcome your inputs and if you will attend please let me know. Thank You

Does your car come with the Old 9.3 rear or did you install the rear? I have a Olds 9.3 on my 63 Impala 409

Hi everyone I am going to head up the return of the Rocking Chair 348-409 event for this upcoming year. The date should be June 29th 2024? I have to talk to Gary Gore and he is good to go and I have also talk to Al Loy for some advice and what he did for making this event successful. I am...

I think it was they camera here is another photo

So i pulled the motor and took the oil pan off found the broken pieces clean the pan. Installed the pan with 4 bolts and flushed the motor out with some 4 gals of 5-30w and transmission fluid. I used priming tool and took the oil pressure fitting off installed a hose so it can exit out in to 5...

Not a good day for my 409

OK thanks I will try that

I need some advice on how to make the throttle lever longer (maybe) or some other idea for the throttle setup since the carburetors sit up higher and the angle of the rod makes the kind of on the stiff side. I was thinking of using a 57 Chevy throttle lever it might be longer thanks

Thanks

Update: So I setup the linkage and rig a fuel line and she started right up. So tomorrow will come up with a better fuel line setup so I can drive and then order a adjustable fuel log.

Offset spacers intake I also have modified Intake i will do next

Update mock up on my motor everything clears