alexm900

Took on a little project for a friend. This really cool custom air cleaner was never completed by the original owner. It just needed...

Seon here who dropped off line when I was diagnosed with stage 4 cancer. I under went radiation and currently doing Chemo. Still weak...

Pontiac GP 1963 (?)

Hello everyone.. I'm Scott from NY and new to this site. I have a 348 with 6 Stromberg 97 carbs looking to run 4 of them. I could use a...

I never liked those mesh screen type filters. 35 microns is over .001 of an inch and that’s big enough to cause a good amount of wear. A...

TotalSeal guys chucked 5 gr of magnaflux powder in an oil system for giggles and did a particle count analysis and

Depending where the pcv is connected (i.e. center carb base plate for me) it is a vacuum leak changing the a/f ratio, potentially...

So what filter do you use and how?

For the 348/440, an old style (ribbed), tall, non-bypass SystemOne, with the thinking that filter valve failure or erratic pressure...

I have used SystemOne oil filters for a long time on many 'precious' engines, but recommend that one checks the bottom plate element...

German dude gets vaccinated 200+ times for Cvid ( www.thelancet.com/action/showPdf?pii=S1473-3099(24)00134-8 )

Your questions sounds like, if you made the sleeves, could you use them to prime a W while using an off the shelf drive shaft. Not that...

Years ago I made a primer for sbc/bbc. I machined off the teeth of the distributor drive. Then when I needed one for my 409, I couldn't...

Sorry for no searching around. It looks like it could work (re. sbc/bbc oil primer tool AND distributor adapter sleeve) according to...