Recent content by Apache 59

Thank you, that is my assumption too.

yes, but you can get them in 4 -7 swap in a custom grind

Thank you for taking the time to research it. I think the 110 you are see on there website is the lobe separation angle (LSA). That is different from cam centerline. If the 110 LSA and the cam is ground with 4 degree advancement you would end up with a centerline of 106. I will e-mail them and...

Most of comp cams, but not all are ground with 4 degree of advance. I'm trying to design my engine to closely resemble the Edelbrock 2268 cam, but with reduced lift and a little added duration to make up for the loss of lift and still keep the same overlap, give or take 1 degree. Don't know if...

Does anyone know the cam centerline on the XE284HR-10, my guess is 106, but Comp Cams doesn't say anywhere that I can find.