Hi i just got new power steering brackets for my 348 from show cars part # 6640 .Help where do they mount ? what size bolt holes and where do i drill ? If someone has pictures with # 6640 brackets on a 348 would be great . thanks
Mine leaked twice the second time I did it I installed the axle with some black RTV so far so good .If it leaks again I going to pull the axle have the axle polished about 2 inches away from bearing install a seal in the axle tube , you can find a seal by dimensions via good auto parts store...
GREAT news I was trying to mount the pitman arm straight back WRONG must be mounted 90 degrees to the driver side . Now it fits and don`t hit THANKS for all the help
No, all the parts are stock I drove this car the two things I changed was 605 steering box and the adapter plate. I called the place I got the plate at they said they sold many of these adapter plates and never had a problem with them ,I know it is a 605 box because it is stamped 605 and the...
Hi , I installed a 605 steering box in my 1964 impala it has STOCK manual steering parts I bought the adapter plate new 605 box I know it is a 605 because of the round clip on top and 605 # on it . I mounted the box BUT I can not install the pitman arm because I can not push the draglink back...
Hi I have a 1964 impala 2 door hardtop I got the car with no glass in it. I bought front and rear clips but don't know where they go ,do they go in before the glass ? Does anyone have pictures where they go ?
Hi I have a gm aircleaner with a 4 1/4 hole in the base plate does it fit a carter or rochester 4 barrel ? It is going on a 327 I have the factory intake looking for a carb any suggestion ? thanks
What is the diffence between small port and large 348/ 409intake how can I tell the diffence ?Can you interchange small with large or large with small ?
Hi , I dont know where I am going to put it maybe pull the 327 out of the 64 or find a nice 1960 impala project car . I got the 348 at a good price so I HAD to buy it this is my first W block.