Recent content by donsz

I hope this is OK to post, I don't want violate any rules, I understand if this post is deleted. This is NOT a sales pitch; it is a request to get a few forum members to provide feedback on a home auto hobbyist software application I just completed. I authored a previous version last year...

The three major things that go on these old radios are: 1. The multi-vibrator (usually get replaced with a solid state version) 2. Electrolytic capacitors 3. Tubes You're probably looking at $200 -400 to get it restored. You might consider a converted radio or a Custom Auto Sound (or like...

I agree: I was thinking on a pragmatic level, that if a spouse needs to have a "garage sale", the pertinent data (part name, price, etc.) is already on the label. And that would make it easier for potential buyers or anyone doing an inventory. The label data comes from data that already exists...

Barcode print and scan is not difficult. I didn't do that for the prototype because it would require a scanner and printer. With a label maker you only need the label printer. Also, the label has the ability to provide the name of the object, pricing, and other pertinent data. I'm not saying...

Randy: Sounds like a good plan to me.:winner don

That is why the logins have associated security levels. Lower security levels do not see the cost info. But I'm guessing most wifes have already figured out whatever you spent, it's too much. But a thought, if you ever reach the point where you can no longer function, most wives will not know...

If this is inappropriate for this forum or site, please delete, I don't want to violate any rules. I am not a commericial entity, just a auto enthusiast and a member that also enjoys programming. Members of this site have helped me so much over the years, and I certainly don't want to do...

Mine is a 1965 truck 348, the dipstick is on the passenger side. Based on the grime on it when I got, it appears that is how it came. don

Thanks for all the input so far. Some points I should elaborate on: - Data Entry would be minimized with "drop-down" selections. Also more visual in appearance and execution (lots of "point and click) - This is not just an inventory app (idea), looking to make it specific to home hobbyists with...

I'm considering writing an app for the home car hobbyist/enthusiast. I'm not sure it is a worthwhile idea, but here are my initial thoughts and assumptions. I would be interested in feedback basically if the idea has some merit, and any additional suggestions. Assumptions Price: approximately...

Update on my install: Thanks for all input regarding my power steering upgrade. As a reminder: the truck is a 1957 Chevy 3600 NAPCO (1/2 ton NAPCO suspension). The engine is a Chevy 348, and this was the major problem; no space for the power steering box at the exhaust manifold. Special thanks...

I don't know if this applies to your year block, but I used these brackets on my 1965 348 block (just needed a little touch up to fit). No holes were drilled into the block. And As Don Jacks points out, mine is a truck block, so this all may not apply...

It may be your router, if so you might need to replace. but first I would on your computer (assuming windows 10): 1. just reconnect from the computer: click on the illustrated icon on your task bar and follow the prompts (should show your disconnected network) 2. Or you could check if your...

Thanks Salt Shaker, I did get some help from a friend at Stovebolt.com, bartamos. He has a good amount experience in this. Based on his input, I'm going to install a power steering box outside of the frame. Apparently not an uncommon mod for 1955 -1959 Chevy pickups. This should solve my...

La Hot Rods: Thanks for that info! That is key information for me to address this problem, much appreciated. This site is really terrific for getting access to expert knowledge. don