Recent content by GreenEyez93274

I believe this is the ad he was trying to post. https://www.facebook.com/groups/TRIFIVESWAPMEET/permalink/3650826471652043/?sale_post_id=3650826471652043

I am a member.

Link don't work

https://www.facebook.com/groups/189842715275291/permalink/766712120921678/?sale_post_id=766712120921678 There the Facebook link but you gotta be a member to see the group posts

https://www.ebay.com/itm/284076912963

348 Phil

Looking to buy a double groove crankshaft pulley and water pulley. Trying to mock up for the power steering pump as I only have single groove pulleys.

Block is double notch but says it 60 over already. Crank is underside also. If block wasn't 60 over i might get it.

I recently was on Facebook Marketplace and saw an ad guy selling 348 block (011), crank and heads. After looking at the heads I was trying figure out casting numbers. Never seen that number and searched the fourm for that number also. Nothing came up. Is that truck head?

Hagedorn I was seriously thinking about buying this motor. Saw it on FB since it was short block. I have good heads but you beat me to the punch lol. Have fun with motor.

My dad had the valves on the heads recessed or put higher in the head to avoid the pistons hitting. I remember saying this. The cam i don't remember.

Yes you have to be a member to see.

Finally got the engine, manifolds and 500 power steering box mounted. Everything fitted as it was close. Had to grind the left manifold up top because it was hitting the steering box. Next is to mount the brake booster with me valve covers to check for clearance issues.

Update. Got these manifolds today. Gonna test fit manifolds, 500 steering box, center link with 3/4" forward engine mounts. If everything fits correctly. I can finally weld everything in place and move on to the next step.

He has stock 348 2" exhaust manifolds too just as expensive ‍♂️