You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
Okay I’ll try the lower threaded rod. But where on the fork will I hook it up to unless the dimple that the current fork is sold for an...
-
Okay so after measuring all my items. It appears I might have the wrong clutch fork. See attached photos. Tell me if you all agree. My...
-
Thank you so much. I will be measuring my items. I know for sure I have the correct z bar lower push rod. I’m questioning my clutch...
-
Hello Ross. Yes I have the aluminum 553 BH. The 509 z bar from show cars the lower push rod with the nipple that goes to the clutch...
-
Thank you everyone I will see if I can get a bigger throw out bearing because that I see as the correct fix. Be safe out there everyone.
-
Yeah the rod replacement is by far the easiest avenue to go but I also want to make it right I’ll look for an adjustment one
-
Shoot this is a great point. I never questioned the length of the throw out bearing. What is correct length. I just installed the one...
-
Hey every one. I hope all is well in the 409 world. I’m trying to figure out if my clutch rod is too short from my pedal. I believe it’s...