Recent content by Mr. Chev

No one would eat a Biden, they are all full of shit.

No I think Ansen made shifters for gm, I could be wrong need someone else to confirm but my 61 has a stock ansen shifter

Ansen

Which would you rather have and that should answer your question.

GFY

12 bolt or 9 inch

And yet 24 years later they still dont glue on quarter panels and boxsides and again for the most parts a crash is energy absorption designed in thats why the call the different parts of the vehicle crumple zones and crush points. Yes there is some stretching and shear but usually after massive...

I cant imagine the same sender giving different temp readings...however I can see the 348 running hotter than the 6 banger! make sure your fan is in the shroud the right amount.

https://www.bodyshopbusiness.com/a-not-so-sticky-subject-adhesives/ If you read all of this ot goes into detail about adhesive construction and what the manufacturer suggests Yes there is some adhesive in new cars but none for structural unless supplemented by welding. If i repair a vehicle I...

Im a red seal body and painter since 1983. Ive seen many demos from slickster selling their glue. I have seen two pieces of metal glued together then put on the frame rack and pulled untill the metal ripped and the glue held, Ive seen the same piece of glued metal picked up off the floor after...

collision for the most part is pushing or compressing. When a car or truck is in a collision it doesn’t pull on anything.

I like the t400 for one reason, durability, its just a damn good transmission, best choice, maybe not, good gm transmission you betcha!

has only sheer strength and no compressive strength. in collision the forces are compressive not sheer.

Just to show how nice the cylinders are.