Recent content by Poppas409

What backspace do you have on those 10in wheels, 62Biscayne482? Also what size tire ? Any mods to fenderwell lips or inside?

I live in New Port Richey, Tampa area. Last year I bought 18inx7 front, 18x8 rear. Thinking about going back to 15inch, but want deeper dish on the rear, more than stock provides.

Sudsc61. What size wheels and tires are these? What are you changing to? I live in Florida also, might be interested in your wheels.

I believe the cable is loose at the switch, after I took the steering wheel off, I could see it move correctly on top and the blinkers would work, but after moving it several times, it no longer moves the tab in the switch. The screw on top of the column, I don’t have large hands and I can...

I am contemplating selling my 690 heads of my motor I had rebuild in December, I went with Walla heads, bored and stroked. I have no idea what the heads and crank would be worth. I also have Isky solid roller lifters, I went to hydraulic rollers. If I’m on wrong site , sorry, just want an...

I’m back to working on my turn signals, pulled steering wheel and I can see that the mechanism pushes and pulls the stiff wire that goes down the column to the device below. How in the hell do you get to the top screw that holds that device to the column? I watched the cable below when I...

Can you take a picture of the clips so I know where they should be and what they look like, I would really appreciate it. Do you think those clips would be available from SouthCoast Chevy? Or any other idea? Thanks again

Are the clips separate from the molding? Held in place by the windshield? Looking at the molding the lower portion of it has tabs, none on the top. I will try the south coast Chevy.

This is the piece, I was told by a body shop it was missing a piece, I assume broken off, that holds it down flush

I can’t remember the vendor that sells front windshield moulding, I need the passenger side vertical piece. I tried autocityclassic, glass but no moulding.

Thank you I just ordered that manual.

I would like to get that manual that Mr Chev has, my manuals don’t have any of that info in them. What manual is it? I have 61 shop manual, 62 supplement and the wiring and assy manual.

Changed flasher, didn’t help. Watched that wire that’s in the signal switch on the column, wire barely moves when pushing turn signal lever, it just twitches.

Those are some really good pictures. What manual are they out of, I have 61 and 62 supplement manuals and these instructions aren’t in them. Thanks for the help, know better what to look for. Dumb question, but how do I remove the horn ring to access mechanism below it?

No blinking on dash or otherwise, are you referring to connection under the horn ring for the connecting wire. On that note how do you remove the horn ring to access the clock spring and internals?