-
-
R63ss replied to the thread Happy Birthday ROYALOAK62.:bday1 Happy Birthday -
R63ss replied to the thread Happy Birthday! real61ss.Have a great Birthday :bday1
-
No I think Ansen made shifters for gm, I could be wrong need someone else to confirm but my 61 has a stock ansen shifter
-
Ansen
-
Ansen style, same as 59-63 but I believe they were made by Inland, another GM Company.
-
R63ss reacted to 63409's post in the thread Bill Jenkins Mr. Chevrolet talks about the Z11s with
Like.
Bill grumpy Jenkins Mr. Chevrolet and the Z 11s plus at the end of this episode Arnie Beswick, the farmer, Mr. Pontiac talks about the... -
Thanks for posting the VIN tag because this required a bit more detective work. The VIN 31847S197087 is correct for a St Louis car built...
-
On a 62 there is a pivot pin the hold the hinge to the body. There is a little metal tab that covers one end of the pin so it won't fall...
-
R63ss replied to the thread Looking for advice on 1963 Impala SS.After reading Carl’s post about the engine not being original but the vin and date code stamp on the pad looking to be correct.What does...
-
-
This is my 63 Biscayne shroud like above postings.
-
R63ss replied to the thread Looking for advice on 1963 Impala SS.I would be leary of both the trim tag and vin both look like they have been off
-
I would drive a Z28. I did a total rebuild of a old race car back to factory. I'd probably get in trouble with one now. Had a 63 SS 327...
-
Barrett Jackson sold a 1964 Impala lot #812 at Scottsdale 2024 for 154K, it's a Paul car. A friend of mine just sold a 62 Bubble top he...
-
R63ss replied to the thread Looking for advice on 1963 Impala SS.Here is why.Missing the 409 shroud(63’s should have slots on the bottom holes),and missing the return fuel line.Notice the difference in...
-
-
If only I could-lol
-
-
Loading…
-
Loading…
