Simps37
Reaction score
1,619

Latest activity Postings About

    • Simps37
      Simps37 replied to the thread 1937 Chevy Coupe build.
      Put the new flex plate and new starter on last night……had plugs out and spun engine over to check fit. Starter to flex plate looked good...
    • Simps37
      Simps37 replied to the thread 1937 Chevy Coupe build.
      New glass/seals/window tracks are ordered. Since I built this front end about……16 years ago(had to pull off my boots to count that...
    • Simps37
      Simps37 replied to the thread 1937 Chevy Coupe build.
      New flex plate installed…..
      • 96B83436-58CB-4286-9C96-D77C4C88F70F.jpeg
    • Simps37
      Simps37 replied to the thread 1937 Chevy Coupe build.
      No……radiator doghouse, both front fenders must come off and the transmission will be coming out too. It’s really not that bad…. I have...
    • Simps37
      Simps37 replied to the thread 1937 Chevy Coupe build.
      Something else I have thought about….. If I ever need to run a mini-starter…..there is enough meat on the base to have a blind hole...
    • Simps37
      Simps37 replied to the thread 1937 Chevy Coupe build.
      Well…..I received the starter and it would not fit……pin fit the rear hole and bolt lined up with the outside bolt but the inside bolt...
    • Simps37
      Simps37 replied to the thread 1937 Chevy Coupe build.
      When I get my starter I will take pics and report if it helps.
    • Simps37
      Simps37 replied to the thread 1937 Chevy Coupe build.
      He also told me to carefully inspect the outside starter hole for cracks….he said after the offset bolt pattern starters were available...
    • Simps37
      Simps37 replied to the thread 1937 Chevy Coupe build.
      I will take an extra starter bolt and measure the offset hole depth and the depth of the blind hole on the starter to make my pin.
    • Simps37
      Simps37 replied to the thread 1937 Chevy Coupe build.
      I went to an old school starter/alternator repair shop in Ft.Worth today to search out knowledge..…the man had it…… 3 bolt holes in the...
    • Simps37
      Simps37 replied to the thread 1937 Chevy Coupe build.
      Today was a first…..took the coupe down my local FM road to town and got some gas….first time on the road. Transmission works...
    • Simps37
      Simps37 replied to the thread 2x4 edelbrock adjustment.
      Thank you.!
    • Simps37
      I know how to adjust a single edelbrock carb….. Screw in each A/F s crew until it shudders, open until it shudders then find the smooth...
    • Simps37
      Simps37 reacted to W Head's post in the thread Names for Cars with Like Like.
      Still miss my friend Ronnie. W Head 59 Impala- 409 2,4s
    • Simps37
      Simps37 replied to the thread Names for Cars.
      Thank you….was hoping someone had her and would keep the name/artwork!
  • Loading…
  • Loading…
Top