TomO

My 2¢ worth is call SC, SI valves or PEP and get something MADE for your W. Do screw around trying to save 2¢ by using Chrysler parts...

What is the best way to clean the aluminum without destroying the original finish?

I have Scorpion rockers and used the 3/8 thick gaskets. I like them better than 2 glued together.

I wish I could remember. They are not the brands you see now days. but they used to be a name brand. It may come to me.:facepalm

SSpev - What brand and series of rockers? Thanks! Tom O

Happy Birthday!

I have rollers under stock valve covers no drippers. If you need more room glue 2 gaskets together.

It's a 63 Biscayne barn find. I bought it from the origian owner. However, he had sold it years ago to a neighbor who drove it and blew...

The only difference in stock covers that I know is the 58 only ones and you only gain on the front and rear ends as they are more...

Of the steel valve covers, are there any which would give more clearance for roller rockers/poly locks than others? I am aware of the...

The thin flags were part #3792000 and were original on 62 Corvettes and 62-64 pass cars. For 63 the Corvette flags changed to #3827158...

I took the 6 cyl emblem off of my 63 Belair and replaced it with the 327/409 flag emblem. Fit perfectly. Jeff

The factory Impala I6 emblem share the same hole spacing as the 327 flags.

I agree about the color. I actually prefer the pre 63 gray painted covers. Not a fan of chrome but I run whatever works.

Had to add a little bling. :wax