Thanks but it won't be that spectacular. If it goes 10.40s once in a while I'll be a happy camper. Mainly want consistency and little more air under tires to put on a good show.
"The" Homewrecker
- Thread starter Ishiftem
- Start date
Very nice work!!!!!!!!!!!
Dan
Do you have bearings at either end of the anti roll bar ?
Do you have bearings at either end of the anti roll bar ?
You're not going to break that in a hurry Dan!!
Great job
.
Great job.
That's some really nice fabrication work!
Yep, spherical bearings.
Can you tell I like overkill?You're not going to break that in a hurry Dan!!
More then a crap load, but less then a shit ton. If I remember I'll weight it when it comes back out, but it is lighter then the setup I had when the entire suspension is figured in. It's a heavy housing to begin with because it's all 1/4" even the center.
70 pounds. Why do you ask?
Thanks for posting the pictures Dan. Everything is looking great!! I think you'll be dropping below 10.50's not long after hitting the track again.
Can't put mine back there because I'm using the tank in the stock location. Maybe I can squeeze one in the front of the housing like Brian did because I refuse to go back to a fuel cell.
Can't put mine back there because I'm using the tank in the stock location. Maybe I can squeeze one in the front of the housing like Brian did because I refuse to go back to a fuel cell.
Last edited:
The only thing I recognize in that picture is the jack stand, man am I old school. That is great engineering.
Want to help? I have a box of rags and lots of enamel reducer with you name on it!
Want to help? I have a box of rags and lots of enamel reducer with you name on it!
I'm looking forward to removing undercoating.......
