w motor in pick ups

[blown55409]

Anyone have any Idea how many w motors were installed as original equipment in pick ups (if any) in these years. I'm thinking about a tow truck or maybe a 4wd project. It's funny I have always liked the 55 to 59s but thought the 60 to 65s were butt ugly, now I think they're cool.
very best regards
Chip

 

[models916]

None

None originally installed

 

[models916]

Except

unless you call the Elcamino a pickup

 

[dunhamfield]

I wonder how many members here have put W engines in pickups????
I will take claim for the neatest instalation in my 56 pickup..

 

[rwagon57]

I have a '55 2nd series with a W. Its not done yet. I'll try to post pictures this weekend.

 

[CDNpontiac409guy]

Many times I would wager...
Did mine in 1989... all factory mounts, linkage, ect, with a set of headers that I built for it.
Factory 9380 1 ton dually, stock 4 speed trans, 4.10's in the original rear ( had 5.14's:eek: ).
All day, pulling the car trailer, 70 MPH ( and some if you need it )

 

[tripower]

Many times I would wager...
Did mine in 1989... all factory mounts, linkage, ect, with a set of headers that I built for it.
Factory 9380 1 ton dually, stock 4 speed trans, 4.10's in the original rear ( had 5.14's:eek: ).
All day, pulling the car trailer, 70 MPH ( and some if you need it )

Aubrey, That is one cool rig.. 59' Gimmy isn't it?

 

[CDNpontiac409guy]

Yes Dan... in Canada, like our Pontiacs of the era.... the truck is actually a Chevrolet

 

[5509]

Howdy chip, tom m " Doorsslammer".Hows the 55 doin?I put and AOD and wurth rack in the 57 wagon.Get's 20mpg now,drives great! Stop in sometime. tom

 

[blown55409]

Hi Tom
Sounds like your 57 is a long distance cruiser now, way to go.
The 55 is in storage now. Last time out I took my wife and her girl friend on a spin and got on it hard going up hill about 90 in second and let off, the front came down hard and ground my 8 qt. pan into the asphalt, now it is weeping around the drain bung. If I can't fix it in place I'll have to pull the motor, again , Oh well, it looks like I'll be spending $$$$.$$ on a T400 that can hold the power any way.
Take care
Chip

 

[Impalaguru]

409 Pick Up

There was a member of the old chat board, the one at yahoo, I think, that had a dealer installed truck 409 (I think) in a 1/2 ton 65 short box (fleet side). He claimed it was original. His name was Nasty1Ca. I think he lives in Canada. The truck, I believe, was originally from Texas. He posted some great photos of the restoration. Anyone else remember that truck?
Ross

 

[CDNpontiac409guy]

That was Marv Bookman, in Ontario.
I saw the truck personally, in 1992. Yes, it was VERY serious

I think it's a completer dealer installed package, using a truck 409, but it has car water pump, distributor, brackets, ect.
Pretty cool to say the least.

Oh, he did sell the truck a couple years ago.

 

[jboatno4]

I wonder how many members here have put W engines in pickups????
I will take claim for the neatest instalation in my 56 pickup..

Didn't put one in, but I took one OUT of a '63 Chev 1/2 ton that had a '59 348 in it. I'm restoring a '59 El Camino so it fit right in although the EC originally came with a 283.

Jack

 

[Tom Kochtanek]

Maybe?

I once looked at an early 1960s Chevy pickup, possibly a 61 (but not later) that had a 348 in it. It was about 5 years ago. Guy was thinking of selling it then changed his mind. Probably not original? But it did look like it was in there for decades...

TomK

 

[dq409]

That was Marv Bookman, in Ontario.
.

Was that the Marv that was so much fun??
Marv and Melany???

I miss that,,dq

 

[Johnny Pell]

I have a 409 in my 64 K10

 

[BSL409]

I have a 409 in my 64 K10

are you down by the city

 

[Johnny Pell]

Yes I'm in Queens

 

[hamjet]

not a 409, but a mild built 348 .030 bore mild cam with a 2004-r tranny. Fun to drive every day ( except when roads are salted), FUN FUN FUN!!! OOPS! double photos, sorry...Joe

 

[skipxt4]