upper ball joints

Toms63SSQB

Well Known Member
Supporting Member 8
I'm replacing my upper and lower ball joints on my 63 Biscayne and have a question, does the upper ball joint flange go on the top or bottom of the upper control arm? Can't find anything on Youtube.20180716_144330.jpg
 
Last edited:

Toms63SSQB

Well Known Member
Supporting Member 8
Thank you for the replies, I have since figured out out these are cheap ass Chinese Moog k6034 knockoffs. I have since reordered authentic Moog ball joints. Anybody want a pair of upper ball joints?
 

ragtp66

Well Known Member
If you replaced the upper control arm bushings make sure the cross shafts are installed correctly they are not marked but the holes are NOT drilled centered in the shaft. The spacing from the hole to the end of the shaft is different on both sides. If you install them backwards the backside of the A-Arm will hit the frame and you will have to take it all apart again to flip them around ! Wanna take a guess how i KNOW that? :doh
 
Top