3d printing project: Hellraiser puzzle box

bobs409

 
Administrator
If you love horror movies as much as I do, this is just what you need! Your own puzzle box like those used in the Hellraiser movies! :D

I found the files online so I didn't have to do anything but print the 6 sides out for the cube. Around 3 hours for each! I printed them in black and then rolled on some gold paint with a makeshift ink roller I put together. (a piece of vinyl tubing slipped over a metal rod) :p

I used modeling cement to glue the pieces together (they have locking pins so alignment was easy) For weight, I placed a nice chunk of scrap steel inside and some padding so it wouldn't move around. It weighs 1 pound, 11 ounces is just a tad over 3 inches square.

The glass dome and brass base was from an old clock that no longer worked. I saved this knowing I would use it at some point. (I was right!) :D

The black stand is something I designed and 3d printed to display the cube.

Much cooler than a baby Yoda.

DSCN4060.jpgDSCN4061.jpgDSCN4062.jpgDSCN4063.jpgDSCN4064.jpgDSCN4065.jpgDSCN4072.jpg
 
Last edited:
Top