Numbers Match?

[Seon]

I'm curious if the numbers on the heads, intake and exhaust manifold of 348 that's going in the Impala match the block.

Block

Heads

Intake
Manifold



Exhaust Manifold

 

[Don Jacks]

Yes they'll all work together.

 

[Seon]

I figured as much but wanted confirmation. Thx

 

[1958 delivery]

You don't show the block date. The intake's date is too early to be original with those heads. Heads April 1960, intake june 1959

 

[Seon]

I posted the wrong picture of the intake which is a tri-pot that I'm thinking of swapping to.
Here's the 4bbl intake pic.


Are these the block date numbers?

 

[1964SuperStocker]

I posted the wrong picture of the intake which is a tri-pot that I'm thinking of swapping to.
Here's the 4bbl intake pic.

View attachment 84576
Are these the block date numbers?

View attachment 84578

Or these?

View attachment 84579

I was wondering if 379's were ever paired with a tri-power intake from the factory?

 

[Tom Kochtanek]

"I was wondering if 379's were ever paired with a tri-power intake from the factory? "

Pretty sure those 280 horse 348 factory builds were triple twos with 379s. The 350 horse version sported that same intake but with 1147 heads and I suspect a different cam and maybe different pistons?

Someone will correct me if I'm wrong .

Cheers! TomK

 

[Don Jacks]

Yes,the 250 and 280 were the same thing except for carbs.9.5-1 pistons,same cam,same exhaust manifolds,same heads.

 

[oldskydog]

Until the 1147's ( and earlier 1173's) came out the SHP (solid lifter) engines used the same 379 castings but had different part numbers due to the different springs, valves, etc.