New York Shaker

quik9r

Well Known Member
Supporting Member 3
educate me, what is special about that master, bore size? what is the part number
 

Phalen409

Well Known Member
Supporting Member 6
educate me, what is special about that master, bore size? what is the part number
Nothing really special....standard bore for non-power drum brakes. Bore has been sleeved with stainless sleeve. What makes it special to me is that the cap was nice enough to be plated with almost no pitting. But the cap sets it apart
 

pvs409

Well Known Member
Supporting Member 11
That master cylinder should be painted black

Tommy,
I have had about 15 to 20 original screw top original master cylinders over the last 15/20 + years that were not restored, I do not remember any black paint on any of them. Rusty bare metal surfaces is what I remember -since I cleaned every one of them by bead blasting them prior to restoration ?? What did I miss ?
Paul
 
Top