New 348 Guy

[37RatRod]

I find it best to start with the factory jets for said carburetor. If you are starting with six different carburetors tuning may be tough.
Do you know if all the carburetors have the same part number?

They do.. I plan on running only 4 of them. I think I am going to block the 2 center ones.

 

[La Hot Rods]

What brand or style is your intake?
Do you have a way to synchronize the carburetors?

 

[37RatRod]

What brand or style is your intake?
Do you have a way to synchronize the carburetors?

Edelbrock.. I don't.. I guess I need the tool for the top of the carb with the red ball! Lol

 

[La Hot Rods]

If you have a keen ear you can use a piece of rubber tubing, listen from the air horn of the carburetors and hear the difference.

 

[w ogden]

pic file is too large so you will need to resize them to maybe 480/640.

 

[w ogden]

here is a good read on Strombergs from over on the HAMB forum

Great Stromberg TECH Article

While doing research on my Strombergs I found this info (http://www.reds-headers.com/html/red_s_engine_talk_10.html) which helps a person understand...

www.jalopyjournal.com

and another

Rebuilding Stromberg 97's, any tips?

I am rebuilding a few stromberg 97's for the first time and am wondering if there is any tips or things I should do or not do. I've rebuilt alot of...

www.jalopyjournal.com

 

[Jim Sullivan]

Welcome to this great site 37RatRod. Nice car.

 

[37RatRod]

pic file is too large so you will need to resize them to maybe 480/640.

 

[WENGINE]

Welcome 37RatRod cool ride, Hudson Valley covers a lot of land. I’m on the island. Are you planning on going to Rhinebeck in the beginning of May?

 

[37RatRod]

Welcome 37RatRod cool ride, Hudson Valley covers a lot of land. I’m on the island. Are you planning on going to Rhinebeck in the beginning of May?

I am.. hopefully I get it all done.. I'm in Highland near poughkeepsie.. only 30 minutes to Rhinebeck