Search results

  1. Johnny Pell

    w motor in pick ups

    I’m using the stock Manifolds, 327 motor mounts, still using the SM 420 and the Rockwell T221, runs great
  2. Johnny Pell

    409 marine (boat motor/engine)

    Ok thanks, a measurement would greatly be appreciated.
  3. Johnny Pell

    409 marine (boat motor/engine)

    do you have the dipstick that goes with the cast iron pan? I have a cast iron pan on my motor but I don't have the original dipstick or tube, thanks
  4. Johnny Pell

    409 marine (boat motor/engine)

    Pic 2 by Johnny Pell posted Jan 19, 2017 at 2:02 PM409 pan by Johnny Pell posted Jan 19, 2017 at 1:52 PM
  5. Johnny Pell

    409 marine (boat motor/engine)

    Thanks Don I'll give that a try
  6. Johnny Pell

    w motor in pick ups

    Yes I'm in Queens
  7. Johnny Pell

    w motor in pick ups

    I have a 409 in my 64 K10
  8. Johnny Pell

    409 marine (boat motor/engine)

    Hi Don, I think they are forged pistons, I have to take a look at the bill again, I ran the motor with the fuel pump completely off the motor and still heard the noise, I had a bad pump one time that made the same sound, I was hoping that was it, also, there isn't any change in the noise when I...
  9. Johnny Pell

    409 marine (boat motor/engine)

    Hi Robert , it has the 333 heads on it and the block is notched, the engine builder put 10.5 to 1 pistons in it, and an isky 911 cam I'm running a 4gc from a 64 impala 340 horse motor, the motor runs real good but it has some noise issues, I know he ported the heads and put bigger valves in ...
  10. Johnny Pell

    409 marine (boat motor/engine)

    Hi Don both holes are at the same level, I had the plugs out and after putting in 7 quarts the level was just below the holes, when the motor was rebuilt he put in new pistons, Cam , all new valves new rods new oil pump timing chain, the motor runs great but it a little noisy for my liking< when...
  11. Johnny Pell

    409 marine (boat motor/engine)

    Thanks you very much, I've been running 7 quarts, I just wanted to make sure i don't cause any damage, i haven't been happy with this engine since i put it in , its got a noise when its cold, sounds like piston slap and when its warm the valve trane is noisey, at some point ill have to pull it...
  12. Johnny Pell

    409 marine (boat motor/engine)

    There are two plugs on each side of the pan I had one of them out, I put 7quarts in and the level wasn't up to the plug, I've been running 7 quarts, I made up my own dipstick tube, I'm not sure if I'm right or wrong .
  13. Johnny Pell

    409 marine (boat motor/engine)

    Here is the pic of the Motor when I got it, I wish I could find some info on it
  14. Johnny Pell

    409 marine (boat motor/engine)

    I think the motor said Daytona on the valve cover when I got it, I'll see if I can find a pic
  15. Johnny Pell

    409 marine (boat motor/engine)

    I sent a couple of pics, thanks for replying
  16. Johnny Pell

    409 marine (boat motor/engine)

    Hi I have a cast marine pan on my 409, do you know what the correct capacity is? Thanks any info appreciated John
  17. Johnny Pell

    Just picked up this 409 marine engine today

    hi Did you have the cast iron pan on this motor ? I am running the cast iron pan on my motor but I cant find the correct dipstick or tube , my motor was a marine motor also , thanks
  18. Johnny Pell

    Need help from the experts...348 in a 63 c-10 truck / exhaust manifolds-headers

    I have a 64 I used my factory perches and everything fit with no problems
Top