Search results

  1. plumcrazy

    Don's gone Crazy Stroker, 1966 C-10

    HAHAHAH, glad you liked it my friend :>)...
  2. plumcrazy

    Don's gone Crazy Stroker, 1966 C-10

    Hey hey hey, its a GOOD DAY to have a GOOD DAY!!!! For sure you'all gonna think we lost our marbles!!! We've been cooped up too long and decided to make a fun vid about the extra intake port thats capped on the Dodge Demon.. Hows this, we do good? subscribe and see more :>)
  3. plumcrazy

    Don's gone Crazy Stroker, 1966 C-10

    HA!, thanks for the compliment and yea, so i didnt add that part, hahhahahaha... I did on the 4th try fire it up, got to the bottom with the foot clutch and thought "hey man, if you twitch, your toast" and calmly backed off and called in the troups! hahahahaha.... almost
  4. plumcrazy

    Don's gone Crazy Stroker, 1966 C-10

    Yes, your totally right. I was going to use 1/2 inch sleeves in the wood and bolt through so no checking but didnt have exactly what I needed so went with the lags.. OMG though, hahahaha, what an ass kicker!! That bikes too light, so each time you get to the top, worried you wouldn't make it...
  5. plumcrazy

    Don's gone Crazy Stroker, 1966 C-10

    Well, I feel just flattened about not being able to post in a while, all the covid and crazy things happening, but i DID managed to the "Don's Gone Crazy Truck" upgraded to haul our bikes!!! Figured we'd have our hand at a video making it and share.. Hope its acceptable, HA!! Jeanne and the...
  6. plumcrazy

    409 starter

    Its this one, and some friendly advice, buy two..... Its not because their a bad starter, quite the opposite, but if your engine kicks back it can snap it and you will be up a creek waiting for another...
  7. plumcrazy

    Americans & Guns?????

    I knew she was special, and from her on our first Christmas, my wife jeanne, gave me a .45 cal 1911. I was shocked and so happy and since then we've bought more and go to the range with the kids... Protecting the ones you love is love :>)
  8. plumcrazy

    Don's gone Crazy Stroker, 1966 C-10

    Geeze, i actually don't know, will do a bit of digging with the cast number and let you know what i find. Your absolutely right though, no hole for it and its the original plate... Made a little more progress the engine before calling it a day.. Next step is getting the dizzy ready to...
  9. plumcrazy

    Don's gone Crazy Stroker, 1966 C-10

    I'm so dumb sometimes... Look at this manual, notice the pic showing "A" tensioner? Look above at my last pics with the cover off, notice it missing? I took off the cover again after I mega blacked it and noticed no hole to lock in a tensioner than read that manual about 1inch below the same...
  10. plumcrazy

    Don's gone Crazy Stroker, 1966 C-10

    Funny thing, the chain was bone dry and a lock tab not "locked"... someone watching over us on this one.
  11. plumcrazy

    Don's gone Crazy Stroker, 1966 C-10

    Quick question friends!! I went through the last of the engine bits that came back and found these! Ones the oil thrower so pulled the timing cover to be sure (ha, before I was told too) and saw it had one.. Question, this gasket ok to reuse with a bit of mega black?
  12. plumcrazy

    Don's gone Crazy Stroker, 1966 C-10

    Hey hey, its a good day for a good day! We did some more prep of "bits" for the engine and took a peak at the gearbox. The gearbox looked terrible on the outside, had some ugly sludge on the inside, but when we tried to shift through the gears, everything seemed to work perfect. There was NO...
  13. plumcrazy

    Don's gone Crazy Stroker, 1966 C-10

    Dooo it man, ;>). Would be super nice to see a you do your magic on one!!
  14. plumcrazy

    Don's gone Crazy Stroker, 1966 C-10

    More pics...
  15. plumcrazy

    Don's gone Crazy Stroker, 1966 C-10

    Hey hey boys! Been making good progress on all the bits and wanted to share some pics.. The body prep is moving along and well keep getting it a little better each day till the shop is ready for it.. Spending lots of time on the "bits" so all the mocking up of the engine, tearing down to...
  16. plumcrazy

    Don's gone Crazy Stroker, 1966 C-10

    Well boys, it was a "good day to have a good day" and it happened, we received all our stuff!!! I talked to the guy and he said he didnt really know what happened, but it didnt matter to us, we are set! Took about a hour to go through everything, but we have the parts to make it work now...
  17. plumcrazy

    Don's gone Crazy Stroker, 1966 C-10

    Yea, I guess since today makes a week its been long enough to make the call. Today, more rain, but will be workin on prepping all the "good" stuff. The hood, trunk lid, rear fenders and areas on the cowl and front fenders that require just primer and paint... Once were done that, if the shops...
  18. plumcrazy

    Don's gone Crazy Stroker, 1966 C-10

    Got in the replacement tach-housing!!! Well get it cleaned up and ready to install and hopefully in time for the rest of the engine build items on the way...
  19. plumcrazy

    Don's gone Crazy Stroker, 1966 C-10

    Hey hey Junky!!!! Yup, funny you say that. I had the same thought flash before my eyes before the first pass with the sander.. I really did, i sat there and was wondering if it made sense to dig in or just run it... The hard part was we needed to repair a few areas that had failed and thought...
  20. plumcrazy

    348 Water Pump

    So long as the pump is ok, spins free, could you use water pump spacers and bring it back out to work with your belt?
Top