Search results

  1. 567trishop

    Comp cams identiying soild roller

    Yes I have good headers as the engine is in a 55 chev, with gasser style headers, thanks
  2. 567trishop

    Comp cams identiying soild roller

    Grind # 409CH 1419S /4424S R 110.0 DURATION @ .050 INTAKE 247 ROCKER ARM RATIO VALVE ADJ INTAKE .014 DURATION @ .050 EXHAUST 263 INTAKE 1.75 VALVE ADJ EXHAUST .016 LOBE LIFT INTAKE .3480 EXHAUST 1.75 VALVE LIFT INTAKE .609 LOBE LIFT...
  3. 567trishop

    Comp cams identiying soild roller

    Thanks, I had email them last week, but I will ring today
  4. 567trishop

    Comp cams identiying soild roller

    Hi, i brought a comp com a few years ago and have lost the spec sheet, the cam is for my 348, sroked to 434 supercharged the number on the cam are, 1419s / 4424s c48-14 cc r11dr q7042 -09 any help would be great, thanks anthony
  5. 567trishop

    4" stroker help

    I have a blown 348 with a eagle 4" stroke. It has 600hp at the rear wheels and is a manual. My oil pump pick up broke of causing damage to the crank and rods only. Can i put a Callies Dragonslayer Series Forged 4340 Crankshaft for Big Block Chevy 4.000" Stroke, 2.200" Pin, 2.750" Mains in the...
  6. 567trishop

    Blown 409 project

  7. 567trishop

    Blown 409 project

    i made my blower manifold at of a edelbrock twin four, can send you pictures if you like
  8. 567trishop

    348-434 blown

    The Cam is a comp cam with 607 value lift at 1.75 intake @50 is .247 exhaust @50 is .263 110 lc. Compression ratio is 7:1 pistons have been teflon coated ring, other wise followed the build on the 434 in hot rod deluxe mag
  9. 567trishop

    348-434 blown

    Hi I have been collecting and have this engine built of 18 months. It start life as a four barrel 348 in a 59 chev sedan, it now as a four inch stroke, the block has been grouted to the bottom of the welch plugs, full solid roller cam, eddy heads, ross pistons, manifold made by engine builder...
  10. 567trishop

    stroker 348 finally lives---

    looks nice, still building my stroker
  11. 567trishop

    59 Impala 348 car

    I am building the car for a friend. He wants the paint kept as is, which will be painted black at a much later date.
  12. 567trishop

    59 Impala 348 car

    few more pics, ran into trouble with the turbo guide, and replaced it with a power guide. I have put air ride on as well.
  13. 567trishop

    348 Crank deep for turboglide

    Hi I have just discovered that there are a different crank for the turboglide and the manual trans? Can you turn down the spiget (height) on the converter so it will fit inside the crank? thanks anthony
  14. 567trishop

    348 stroker in mag

    I'm currently building a 434, supercharged, I hope to have mine dyno by August too.
  15. 567trishop

    59 Impala 348 car

    Thought I'd show you some pics of a 59 that I'm building, I,ve powercoated the chassis and parts, and have just started to weld up some rust, (floor pans and trunk floor)
  16. 567trishop

    348 with edelbrock heads, value lift

    Thanks guys, I have order the heads, ross pistions at 8.5 to 1 eagle rods, 4' inch stroke crank, roller valve gear, but not the cam. This motor will be supercharged at 10% under. I just wasn't sure about the cam. I will get the parts in 4 weeks.
  17. 567trishop

    348 with edelbrock heads, value lift

    Edelbrock say that their heads used on 348 engines with valve lifts up to .550" only. Can you put bigger lift cams in and what would you have to do , thanks
  18. 567trishop

    Building 348 stroker

    Hi I am started to orded parts to build a 434, with a gm671 with 10 psi. eagle crank, edlebrock heads, comp cam etc, I'm just wandering wheather to change the 2 bolt mains or if the stock mains are ok. Do I use gm bbc 6.135 3/8 BOLTS or eagle BBC 6.135 H beam with 7/16 bolts.
  19. 567trishop

    348 strokers

    You guys are lucky as you live in the states, my 348 my motor owes me over $15,000, which is basically stock with a 671 supercharger. I have to include shipping parts to Australia, duties on the parts coming in and the dollar at 63 cents. I have put mine on the chassis dyno, got 300 hp at the...
  20. 567trishop

    348 strokers

    Thanks for the help and the PMs
Top