mikechef13
New Member
ok i just installed a 348 with a super t-10 in by 59 biscayne. the stock transmission cross member is in place. the transmission looks to fall short of the crossmember holes by about an inch. is there a adapter plate to make this work or do i need to get some steel and make a bracket. also i have a few sets stock manifolds for the 348. it appears that the passenger side does not fit because of the motor mount. i have not tried to bolt it up, just set it in place. If it will fit, it is going to be very very tight. any input on this will help, unless someone has a set of headers for the car they would be willing to part with. I am located in delaware. thanks ahead of time for the help. MIke
