1959 inner fender....

bschulze

Well Known Member
1960 Impala: I was able to remove/replace the drivers side inner fender after removing the grill, radiator, support etc. after a motor swap and clutch pivot bkt welded to the frame. Passenger side, probably but unsure.

Without access from the front, I doubt it.
 

MoboMac

Well Known Member
So......it sounds like it's just simpler to carefully remove the inner and outer together.....

I'm doing the headlight buckets and C-panels.......and the front edge of inner has deteriorated where the c-panel attaches....

It's a decent car.....and desrves a better inner....
 
Top