2 four intake

[Geary Trussell]

Was there ever an aluminum 2 four intake made for the small head w block's?

 

[La Hot Rods]

Edelbrock makes one.

 

[oldskydog]

Offy

 

[Don Jacks]

Edelbrock DID make one,no more.

 

[63 dream'n]

Sorry for my previous post............ I guess I can’t read

 

[boxerdog]

I'm almost done...

 

[boxerdog]

Keith, those were great pics, even if misplaced like mine.

 

[63 dream'n]

Keith, those were great pics, even if misplaced like mine.

I have a picture somewhere of yours also ............ they are beautiful..!!!!

 

[1958 delivery]

Those are purdy

 

[1958 delivery]

Was there ever an aluminum 2 four intake made for the small head w block's?

Aftermarket plenty, if you mean factory, no.

 

[409newby]

I'm almost done...View attachment 70185

Wow Dave looks like that took some work, whats it going on???

 

[boxerdog]

Um, eventually a 385 I built for no good reason. Falls into the category of some of the "stupid things" I mentioned. But I have been sidetracked with the '61 and another project or 2 and haven't fired that engine yet. Got an extra car??

 

[La Hot Rods]

Is that the one that got away?

 

[boxerdog]

Could have been...

 

[rstreet]

Was there ever an aluminum 2 four intake made for the small head w block's?

The Offy works great but setting up the tune to get it running purrfect is time consuming
Robert

 

[heddrik]

Edelbrock DID make one,no more.

Don, when did they stop making the small port? I was going to use one, a single 4 barrel. Should I try and find one now before they all disappear? thank you for the info.

 

[63impalass409]

I have a small port eddy dual that's on my 63 with 817's that I'm eventually going to upgrade to 690's and a 881 intake but I'm hesitant on doing it yet because I'm not sure yet if bigger valves will clear the stock pistons so that intake will be up for grabs after I get off my fat ass and do it but have no idea what they go for?

 

[Don Jacks]

The single carb small port is available,just not the 2 4 bbl small port intake.I don't know when the decision was made,but it was likely a sales volume thing.The last time that I checked,those manifolds were in the 440 dollar range new,I'd say that a good,lightly used one would be reasonably worth around 350.