Jolly green giant
Member
I have a 59 348. Having a problem getting oil to the rockers. Oil pressure gauge is 40-60 psi, distributor is for a 348. No oil to the rockers. I have only had it running about a minute at a time , several times. I primed the motor prior to starting. I mention the distributor because I was told when I purchased the engine that if I was going to use a HEI type distributor that I would need to get the bushing to install. Just curious if im missing something before I tear this thing apart....... I would think oil comes up the back of the engine and goes into the hole towards the lifters, brings the oil forward as long as the distributor is in place ?? Any input ? Thanks