348 pistons and rings

Dean's 61 bubble

Well Known Member
Supporting Member 2
These ran for approx. 15 sec. before i realized the cam was a bit to much for these flattops and i traded them out for notched forged pistons. They are as new and have been cleaned and a scuff pad took off the mark left by the valves. So, if you are building a stock .030 over 348 i would like 150.00 plus the ride for these pistons. Probably close to a 400.00 value, i just don't need them sitting around. Pins are press fit. Piston is typical of what all 8 look like. Thanks, Dean