Working my way through some less than desirable issues on my new to me 60 Impala. After inspecting the linkage on the 3 deuce carb. setup, I can see that the front and rear carbs only open up about 1/3 of the way by the time the center is fully open. I understand that in order to allow the center to open about 1/2 before the other two start to open, there must be an increase in linkage ratio to allow the end carbs to catch up. There is not room to move the end carb. rod up at the center carb. due to the choke housing will be in the way. Have a look at the photos, and see if this monkey shit setup is worth screwing with or should I source a better linkage kit and be done with it. It seems hokey to me.
Thanks in advance for your help.
Thanks in advance for your help.