WA 409 ci 425 hp intake & carbs for sale restored $1450.

#1
This sale is for a restored factory original intake and carbs. The intake is dated 2-8-62. Both the runners on the drivers side were cracked. I veed out both sides of the crack and had it professionally tig welded. It turned out great, you can hardly tell. The carbs are a matched pair 3361 & 3362 with a date code of F3 June of 63. They have all the original factory parts inside and out. It also comes with some of the factory linkage. Anything else you might need you can get from Showcars.com. I have 2 other setups, intake & carbs dated F2 and A4 that are completely restored. In the works is a pair dated G2. Let me know what you need. I will ship for cost only. Tom at 360-4235131 thanks DSCN0781.JPG DSCN0782.JPG DSCN0783.JPG DSCN0781.JPG DSCN0782.JPG DSCN0783.JPG DSCN0784.JPG DSCN0785.JPG DSCN0786.JPG DSCN0789.JPG DSCN0790.JPG DSCN0791.JPG DSCN0792.JPG DSCN0784.JPG DSCN0781.JPG DSCN0782.JPG DSCN0783.JPG DSCN0784.JPG DSCN0785.JPG DSCN0786.JPG DSCN0789.JPG DSCN0783.JPG DSCN0792.JPG DSCN0791.JPG DSCN0790.JPG
 

pvs409

Well Known Member
Supporting Member 6
#5
Question on the linkage.
Are all the linkage arms and controls on the carbs bare metal ?
The choke housing was recolored ?
Paul
 
#7
Question on the linkage.
Are all the linkage arms and controls on the carbs bare metal ?
The choke housing was recolored ?
Paul
Paul, All the linkage has been glass beaded if needed, then brushed on a wire wheel and clear coated with Eastwood fuel resistant semi gloss Diamond Clear. I've been using it for years and haven't had any complaints about it. The choke housing was given a very light squirt of Eastwood Carb Renew to give it that brownish look. It turned out great. Thanks for your interest, Tom