409 headers for dragster

La Hot Rods

Well Seasoned Member
Supporting Member 15
Can't say that I have, guess I would have noticed if the plug was missing.
I have dealt with the yoke splines leaks many time.
Ran one of those coupler in the rear engine dragster, and have one in my front engine car now. :good
 

Howard Hull

Well Known Member
Toutle, Billetproof 2019, 1st try with a powerglide, fairly good smoky run. in slow mo. No trans brake, just gas pedal. MSD box stop working and with just distributor and coil was running poorly for the first time in 5 years, will look harder in a few days, for what happened, maybe just a bad wire or a short.
 

Howard Hull

Well Known Member
The glide s Working . I have updated to
Roller rockers. Stainless steel larger Valves and 8” tiires. Because I am now going straight , my time dropped
To 6.7 at 110 mph in the 1/8th . Quite a thrill. I
Am now building an 8 two barrel manilfold
For it. I’ll show my card board mock
Up.
 

Attachments

  • IMG_9940.jpeg
    IMG_9940.jpeg
    97.2 KB · Views: 33
  • IMG_9941.jpeg
    IMG_9941.jpeg
    97.1 KB · Views: 31
  • IMG_9931.jpeg
    IMG_9931.jpeg
    79 KB · Views: 31
  • IMG_9932.jpeg
    IMG_9932.jpeg
    102.9 KB · Views: 32
Top