59 348 Won't Idle

Jim Sullivan

Well Known Member
Supporting Member 10
I haven't looked at a choke tube in a while, but I thought the end of the tube, from the choke housing, at the exhaust manifold was reduced to fit into the tube in the manifold. Also, the tube in the manifold had a piece of spiraled metal so the air would absorb more heat? :rub
 

Iowa409

Well Known Member
Supporting Member 3
I am not running my choke, went to headers, so place to mount tube is not there, unless I go electric, but.... I did seal the two ports under my 4GC, I have no intentions of driving it in any cold weather, but if I did, I just always feathered the gas until its warm.
 
Top