62 biscayne 409 project

38Chevy

Well Known Member
Creaking noise from the valve train may just be the hydraulic lifters bleeding down. That's a normal noise. When the engine stops turning the lifters on the valves that are open will slowly bleed down.
 

La Hot Rods

Well Seasoned Member
Supporting Member 15
If my drill press is making noise, it's making the same noise as the springs. :scratch
The springs are used and the engine has been run. Looks like fresh rebuild on the heads.
 

blkblk63ss

Well Seasoned Member
Supporting Member 5
You try squirting some oil on the spring? After all that's what it will get running!.
 
Top