63 Console bracket

Kaycee

Well Known Member
Was the console bracket spot welded to floor board , got a repop bracket and was planning to just screw it down after carpet . After cruising some of your alls builds I see the bracket is still on the floor after tear down :rubalso does anyone have some reference points to install rear bracket ?
 

blkblk63ss

Well Seasoned Member
Supporting Member 5
Bracket's were screwed to floor. .Just screw bracket's to console compartment,and then lay compartment down where you want it ,then mark front and rear of compartment and sides where it lays on carpet.Then measure from marks you made to the mounting side holes on compartment and write all measurements down.Remove bracket from compartment, and lay bracket back down and set as your measurements to the bracket holes. Center the bracket on hump between seats.
 
Top