64 Impala 409 project

ruby4lak

Member
P1100678_zps59c77c37.jpg

P1100682_zpsb30c43bb.jpg

P1100697_zps88e959a3.jpg
 

Rickys61

Well Known Member
Supporting Member 3
Wow!!! That looks great!! Those headers look like they fit real good!! What kind are they??
 

PAINTJOHN1

Well Known Member
Supporting Member 2
Your car and engine looks great.Nice project.One problem though: You have your carburators mixed up.The choke carb goes on as the second carb on the back of the manifold..Normally if you had stock exhaust manifolds your choke heat tube would come from the manifold directly to the back carbs choke housing.You can see how that would line up with the carb which would be directly over the center of the manifold.Other than that everything looks beautiful.
 

ruby4lak

Member
Yea we caught that after the body was on the frame John, This is my first frame off on a impala or 409 to be exact, lots of learning. The headers are Sanderson for back in 1980 so not even sure if they make them any more but I found the nos out in Carlisle.
 
Top