9'' conversion brackets

[409 lever]

I am rounding up parts to do a low buck 9'' furd conversion this winter. I have a housing out of a 64 galaxy that has 3.50 gear. I was wondering if I could purchase a set of upper and lower control arm brackets from anyone?
i can find the upper left side one easily but the others I have not been able to locate.

 

[9664imp]

Currie enterprise shows both lowers, pass side upper and panhard bar.

 

[MRHP]

I would bet Johns Industries would sell you brackets. 1 800 332 3450, pick the first prompt and ask for Lynn.

 

[models916]

Circle track chassis suppliers sell all kinds of brackets that could work. I bought this from Currie and only used the lowers.
http://www.currieenterprises.com/cestore/ProductsRE.aspx?id=2495

I think circle track G body lowers could be rotated to work on the 59-64 B body.

Currie offers this? Lot of money.
http://currieenterprises2.reachlocal.net/cestore/productsRE.aspx?id=1773

Cheapest route is to get a swap meet housing empty and cut the brackets off. Plasma cutter should do it.

 

[409 lever]

thanks for the links