All I can say, is Tom stopped by and we had a good talk. 
A Day In The Office
- Thread starter La Hot Rods
- Start date
Is that a real Judge?? I put headers on my '67 GTO. Took the better part of 6 hrs. Never again. I use Ram Air factory manifolds instead, Carmine.
All I can say, is Tom stopped by and we had a good talk.
Was Budweiser part of the subject matter?
I bet you'd change your mind after the first kick Scott.
Dave, that didn't start tell I got home.
Carmine, this one is just a GTO with a 4 speed.
I’ve been kicked before. And prefer not to go through either again.
Who won?All I can say, is Tom stopped by and we had a good talk.
Not sure Cecil, I had to walk away I got them bolted back on with some high temp sealer that needed to set overnight.
I dropped all six of the bolt at least six times trying to get that one pain in the but bolt started.
It's a good thing I work alone, I may have lost my cool once, found my pliers on the floor across the shop.
I dropped all six of the bolt at least six times trying to get that one pain in the but bolt started.
It's a good thing I work alone, I may have lost my cool once, found my pliers on the floor across the shop.
I'am all better now. I don't generally let cars get the better of me, the good news was I didn't get out the BFH. 
Good news, back at the shop today. No header leak. 
Last edited:
James you are the most patient guy I know .
Congrats!
.Congrats!
I think someone let there guard down. 
Last inspection was 1990.
Last inspection was 1990.
These 
British cars seem to multiply like rabbits!
Don, I think I am the only guy around mid Missouri that will work on them.
This car came from 105 miles north of us, and have a TR6 coming from up north also that has been setting for years.
This car came from 105 miles north of us, and have a TR6 coming from up north also that has been setting for years.
Truth is, I would rather work on these silly little cars than the 2005 Cad SRX I had to puch out of the shop. It showed up with a no start after someone else install a used engine. Took a little time to find one ground wire hook to a plastic valve cover and the engine wiring harness with a bunch of bad wire in it. Customer don't have any money, not sure why the boss took it in.