A Long Awaited Marriage

La Hot Rods

Well Seasoned Member
Supporting Member 15
No, that was just a butt weld. Nathan cut the quarter in half to make it easier to work with. His quarters looked like they had been ran over by the delivery truck.
This is the same process I am going to use on the Shaker.
Just so you know Nathan nor myself are body men we just feel we can do it. :weld
 

blkblk63ss

Well Seasoned Member
Supporting Member 5
No, that was just a butt weld. Nathan cut the quarter in half to make it easier to work with. His quarters looked like they had been ran over by the delivery truck.
This is the same process I am going to use on the Shaker.
Just so you know Nathan nor myself are body men we just feel we can do it. :weld
I meant the horizontal seam , you did not step it ? Just glued in overlap?
 

La Hot Rods

Well Seasoned Member
Supporting Member 15
Got a chance to spend some time on the car. We had to redo the front brake lines, as the headers were just a little to close. We also changed out the rear calipers that leaked out of the box. So it was a good day, we now have a brake pedal. :good One more thing off the to do list. :)
 
Top