Aluminum Rear Bumper Project

Jim Sullivan

Well Known Member
Supporting Member 10
Rough cut a couple pieces for the next bumper end. Used my plasma cutter for the first time on aluminum. Worked great for cutting smaller pieces from the 4'x8' sheet. Too bad I'm not that steady without a guide. But the band saw will trim it down nicely.IMG_20200717_153638.jpgIMG_20200717_153655.jpg
 

Jim Sullivan

Well Known Member
Supporting Member 10
Oh there are things that I won't attempt for one reason or another. I try and take on projects that I am fairly confident that I can succeed at. There are much more talented people out there than I. And as they say it is only metal, you can cut it, weld it, shrink and stretch until it looks like what you want it to.
 
Top