Tony has another satisfied customer!!! Picked this up from Tony yesterday and the customer came in this morning to take it home. He was really happy!!!!
Customer furnished his 348 block. We used 409 crank and rods and Ross .040" 10.5 pistons. We now have 383 cubic inches. Tony used a Isky 262 hydraulic cam. The engine will have a 700R4 behind it and installed in a 59 Impala. Topped off the block with a set of 817 340HP 409 heads. Cut down 425HP intake valves to 2.010. Customer will put on his 348 3x2 setup. Should make a real nice, steetable engine.
Just a little eye candy for you Jason!!!!!!!!!! probably can't sleep now until Monday night.....right??????????
Customer furnished his 348 block. We used 409 crank and rods and Ross .040" 10.5 pistons. We now have 383 cubic inches. Tony used a Isky 262 hydraulic cam. The engine will have a 700R4 behind it and installed in a 59 Impala. Topped off the block with a set of 817 340HP 409 heads. Cut down 425HP intake valves to 2.010. Customer will put on his 348 3x2 setup. Should make a real nice, steetable engine.
Just a little eye candy for you Jason!!!!!!!!!! probably can't sleep now until Monday night.....right??????????
Hi Phil,is it an optical delusion on my part,or did Tony cut exhaust valve notches on this block?
Thanks for the pictures,Phil,and for the wisdom Ronnie.Since this is my first w motor,you guy's have shown me a lot of detail orented stuff that I feel I need to know.I appreciiate it greatly.
